Advertisement date July 25, 2024 @ 4:21 p.m. through bid opening date

Miller Equipment Company, Inc. Requests Sub-bids from All Qualified & Certified DBE Subcontractors/Suppliers for:
Contracting Agency: Southern California Logistics Airport Authority | Project No. #CC24-126
Project: Runway 17/35 Reconstruction Phase V
DBE Goal: 14%
Bids open on August 14, 2024, at 2:30 P.M. (PST)

PROJECT DESCRIPTION: This project entails the fifth phase of the reconstruction of the asphalt portions of Runway 17/35, consisting of the removal and replacement of approximately 120,000 square feet of structural runway pavement section to current FAA Design Standards. Ancillary to the runway reconstruction work, partial replacement of approximately 1,600 linear feet of existing asphalt runway shoulders shall be performed. Phase V includes improvements to the existing storm drainage system at the intersection of Runways 17/35 and 3/21, where approximately 1,800 linear feet of storm drain piping will be installed. Reconstruction of the Runway 3 blast pad pavement (88,000 square feet) shall be performed with the storm drain improvements along with improving an existing storm water basin. Lastly, Phase V will entail the reconstruction of approximately 35,000 square feet of taxilane PCC pavement.

Plans & Specs can be viewed for free at our office or online at: https://www.victorvilleca.gov/government/city-departments/administrative-services/finance/purchasing/bids

Miller Equipment Company, Inc. requests sub quotes from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for the following items of work, including but not limited to: Erosion Control, Runway Closure Markers, Black-Out Existing Pavement Markers, Black-Out Test Strips, Provide Two Coats 0.12 Gal/Sy Ss1-H Asphaltic Emulsion Seal Coat, Connect Temporary Thershold Lights, Provide Temporary Pavement Markers (One Coat) With Beads, Grind 0.21 X 7-Foot Shoulder , Provide 2- 24" HDPE Culvert (D-701-5.1), Provide 48 X 48" Precast Inlet With H-20 Grate (D-751-5.1), Provide Clsm Encasement (P-153-6.2), Provide Non-Reinforced Portland Cement Concrete Pavement (T=17.5")(W=150')(P-501- 8.1), PCCP Edge Clsm Backfill (P-153-6.1), Provide Hot-Mix Asphalt P-403 Base Course - 0.21' (P-403-8.1), Provide Hot-Mix Asphalt P-403 Base Course – T= Variable(P-403-8.3), Provide Hot-Mix Asphalt P-403 Base Course -.29' (P-403-8.4), Provide Hot-Mix Asphalt P-403 Base Course - 0.17' (P-403-8.2), Provide 0.12 Gal/Sy Ss1-H Asphaltic Emulsion Seal Coat (P-623-8.1), Remove And Dispose Of Existing Approach Lighting System And Arresting Cable System , Provide 48X48" Precast Inlet With H-20 Grate , Provide 2 - 24-Inch HDPE (D-701-5.1 ), Provide Clsm Backfill [3-21] (P-153-6.2), Provide Hot-Mix Asphalt P-403 Base Course - 0.29' (P-403-8.1), Provide Hot-Mix Asphalt P-403 Base Course - 0.17' (P-403-8.3), Provide Pavement Markings With Beads, 2-Coats (P-620-5.2), Provide Pavement Markings Without Beads, 2- Coats (P-620-5.1), Provide Hot-Mix Asphalt P-403 Base Course -.29' (P-403-8.3), Remove, Haul And Stockpile Existing PCC Pavement , Provide Geotextile , Provide Non-Reinforced Portland Cement Concrete Pavement, Provide Thickened Edge Section , Provide Isolation Joint , Provide Pavement Markings With Beads, 2-Coats , Provide Pavement Markings Without Beads, 2-Coats , Remove And Stockpile Existing PCC Pavement To P-219 Specifications, Haul And Stockpile Excess Or Unsuitable Excavation , Consolidate Existing Material Stockpiles , Crush Stockpiled PCC To P-304 Specifications , Crush Stockpiled Ac To P-208 Specifications. See plans and specs for a complete list of bid items

Requirements: Miller is signatory to Operating Engineers, Laborers. 100% performance and payment bonds required for the full amount of the subcontract price. Miller may assist with the bond premium up to 1.5%. Subcontractors must possess a current contractor’s license, insurance and worker’s compensation insurance coverage meeting Miller’s requirements and will be required to sign the standard Miller Subcontract Agreement. A copy of the insurance requirements and agreements can be obtained by contacting the Estimator. Subcontractors must also be registered with a current DIR number. Quotations will be broken down into comparable packages as reasonably necessary. Miller will work with interested subcontractors to identify opportunities to break down items into economically feasible packages. Please call if you need assistance in obtaining bonding, insurance, equipment, materials, and/or supplies. Miller intends to work cooperatively with all qualified firms seeking work on this project. Miller is an Equal Opportunity Employer.

Miller Equipment Company, Inc
PO Box 2956 Lancaster, Ca 93539
Phone: 661-945-2525 Fax: 661-945-1183

Estimator: Steven Devers
Email: Steve@millereqco.com

Published by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com
This advertisement will run through the bid date.